Winter Cooler Storage: If you are storing a cooler in the winter, then do these 5 things; otherwise, you will regret it next summer.

Newspoint

Home Tips: Water, dust, and moisture inside a cooler are not properly cleaned before it is turned off. Therefore, some important precautions should be taken before storing the cooler for an extended period.

 

 

 

How to clean the cooler

Clean your air cooler before storing it: If you're going to put away your cooler after the winter season begins, simply cleaning it and storing it in a corner isn't the best approach. When you take it out again in the summer, it may smell bad, black marks may appear on the cooling pads, and the bottom may even be rusted. Sometimes, the dirt inside the cooler can also attract insects.

This usually happens when the cooler isn't properly cleaned of water, dust, and moisture before disposing of it. Therefore, it's important to take some precautions before storing the cooler for an extended period. This will reduce the hassle of operating the cooler next summer.

 

Drain all the water from the cooler.

The first step before storing the cooler is to drain it completely. To do this, turn off the cooler and remove the plug. Then, open the drain plug and drain the tank. Sometimes, some water remains at the bottom. Tilt the cooler slightly to drain any remaining water. Then, wipe the tank dry with a clean cloth. Leftover water in the cooler for extended periods can cause odors and dirt, so don't skip this step.

Dry the inside of the cooler thoroughly.

Even after draining the water, moisture may remain inside the cooler. Therefore, do not cover it immediately. If your cooler has a fan-only mode, empty the tank, turn off the pump, and run only the fan for 30 to 60 minutes. If this mode is not available, open the cooler's panels and place it in a well-ventilated area for a few hours. Cover the cooler only after it has completely dried.

Remove and clean the cooling pad

Cooler cooling pads tend to accumulate dust and dirt during the summer. Leaving them unattended for extended periods can cause them to smell and even deteriorate due to water and moisture. Therefore, remove the cooling pads and rinse them with clean water. If there's significant dirt, use mild soap and a soft brush. Afterward, rinse them thoroughly and let them dry completely in the shade. If the pad is already extremely dirty, cracked, or smells bad, it's best to replace it rather than leave it until next summer.

Clean the fan, mesh, and pump area.

While cleaning the outside of the cooler, pay attention to the inside as well. Use a soft cloth to clean any dust accumulated on the mesh, fan blades, and surrounding areas. You can first wipe with a slightly damp cloth and then wipe with a dry cloth. Be sure to check around the pump as well. If you see any white deposits or sticky dirt, clean it and dry it thoroughly. However, avoid pouring water directly onto the electrical components.

Consider the cover and storage space.

Once the cooler is clean and dry, cover it and store it in a place free of moisture. Avoid placing the cooler directly on a wet floor. If necessary, use a small wooden stand or a dry place underneath. Use a cover that allows some ventilation. Covering the cooler with very tight plastic is not advisable, as it can trap moisture inside. This moisture can later lead to odor and fungus. Also, avoid placing the cooler in a place where there is constant moisture around it or where there is a high possibility of insects.

If you have kept it for a long time, then definitely check it once in between.

If the cooler isn't going to be used for several months, remove its cover once every month or two to check for moisture, a foul odor, or any insects. If moisture is visible, leave the cooler open for a while and dry it thoroughly. This won't take much time and can prevent problems later.